PulseTech World Charger 12 Volt 20 Amp XCR-20
PulseTech World Charger 12 Volt 20 Amp XCR-20
Product Description
20-Amp Charger Recovers Batteries Thought To Be Dead & Useless
Finally, there is a way you can recover dead lead-acid batteries that up until now were thought to be beyond saving. Presenting the Pulse Charger/World Version, the most effective battery charger available and winner of the Innovation Award for Service Shop Equipment at IMTEC (National Marine Trade Exhibition & Conference)
This revolutionary charger is a necessity for any facility that services battery problems, including service shops, fleet maintenance departments and garages. It actually combines four chargers in one. It is a state-of-the-art charging system (up to 20 amps) that works with both 12-volt conventional flooded lead-acid batteries and sealed “maintenance-free” batteries, including gel cell. Plus, it also works off either 110- or 220-volt ac power so it can be used virtually anywhere in the world.
Recover Dead, Sulfated Batteries
The Pulse Charger also has the ability to recover dead batteries. This patented unit uses our revolutionary ReNew-IT Pulse Technology™ to safely prevent the main cause of battery problems and failure: sulfation buildup on lead-acid battery plates. Tested and used extensively by the U.S. Military worldwide for almost ten years, this technology has been scientifically proven by two major universities to make batteries work harder and last longer than you ever thought possible. By removing the lead-sulfate deposits on the battery plates, active material is exposed which allows the dead battery to once again accept and release energy.
In the past, even the most sophisticated chargers have had little or no success charging batteries with sulfation buildup. But now the Pulse Charger solves this age-old problem. Using pulse technology, it emits a pulsating dc current into the battery that re-energizes and removes the lead sulfate deposits from the plates, then returns them to the battery acid as active electrolyte. By “cleaning” the battery plates, the Pulse Charger enables dead batteries to once again accept a charge.
Improve Battery Performance
It also helps ensure battery performance, increase battery life dramatically and reduce battery-related downtime, maintenance and costs. Plus it even helps protect the environment. Since batteries last longer, there will be less contamination from leads and sulfuric acid leaking from discarded batteries.
The Pulse Charger is voltage regulated and microprocessor controlled. This unique system will provide all the charge a battery will accept regardless of the rated amp-hour capacity or rated cold cranking amps. It will charge each 12-volt battery to it’s optimum level by constantly monitoring the battery and adjusting the charging current accordingly. Then, it automatically switches to Pulse Only mode when the battery reaches full charge so it will never harm the battery.
It also has two settings: Pulse & Charge and Pulse Only. Since all batteries (even new ones) have some level of sulfation buildup, the Pulse Only setting will clean the plates. The Pulse & Charge setting will then charge the battery while continuing to clean the plates. Made in the United States. # WC2200, XCR20.
- Desulfates & charges at the same time.
- Automatically shuts off when battery is fully charged.
- Works anywhere in the world with both 110 & 220-volt electrical input.
- Helps ensure battery performance by eliminating the main cause of lead-acid battery failure—sulfation buildup & related problems.
- Maximum Output: 12 volts dc, up to 20 amps dc.
- Helps protect the environment.
- Works with all conventional flooded lead-acid batteries and sealed "maintenance-free" batteries, including Valve Regulated Lead-Acid (VRLA), Absorbed Glass Mat (AGM) and gel cell.
- Optimal 3 Step Charging
- Reverse Polarity Protection
- Over Voltage Protected
- Short Circuit Protection
- Overload Protection
- Line Regulation
- Ammeter
- 1 Year Warranty
|
Review Summary
0
0
0
0
0
Write Your Own Review
Do you own the PulseTech World Charger 12 Volt 20 Amp XCR-20? Please, tell us what you think about it. It helps us provide you with better products. Please note that it may take up to 72 hours for your review to appear. Write a review |
Width 11.5
Height 7
Weight 12
Shipping Weight (lb.) 13
Output Amperage, Max Continuous 20 A
Max Current, During Bulk Charge 20 A
AC Input Volts 115/230 V Switchable
AC Input Volts Freq. 50/60 Hz
AC Input Volts Range 100–250 V
Desulphation Pulse 3.26 MHz
Enclosure ABS Pelican Case
Output Banks 1
Regulatory Approval UL, CSA, CE
OEM Ref XCR-20
Manufacturer: PulseTech
Made In: USA
![]() |
Pulse Tech 390PT Digital Battery Conductance Analyzer |
Order Line: 1-800-362-5397
M–F 7am–4pm PST
Tech Help: 541-474-4421
Fax: 541-471-6014
276 Tech Way, Suite A
Grants Pass, OR 97526



