SDC-30
SDC-30
Product Description
This high efficiency switch-mode step-down DC-DC converter converts an input voltage of 24 VDC nominal (range 20 VDC to 35 VDC) to a highly regulated output voltage of 12 VDC nominal (13.8 VDC) at 30 Amps. The SDC-30 DC-DC converter is non-isolated (no galvanic isolation between input and output) and meant for use in negative ground systems. Features include overload, over-heating, reverse polarity and over-voltage protection.
Features
- Advanced switchmode design
- Mount in almost any location
- Compact and light weight
- Reverse polarity protection
- High efficiency
- Cycle by cycle current limiting circuit
- Overvoltage protection
- Short circuit protection
- Reverse Polarity Protection
- Over Voltage Protected
- Short Circuit Protection
- Overload Protection
- Line Regulation
- Output Regulation
- 2 year Warranty
Comments
Application examples include:
Earth moving equipment
Heavy trucks
Buses
Marine vehicles
CB radios
12 Volt lighting systems
AM/FM sound systems
BatteryStuff Part #: SDC-30
In StockNo Tax
Price: $98.00
In StockNo TaxTechnical Specifications
Dimensions: 1.9" L x 3.5" W x 5.9" HActual Weight (lb.): 1.5
Shipping Weight (lb.): 2.0
Maximum Power Output, Continuous: 30A
DC Output Amps: 35
DC Output Voltage: 13.8
Output Amperage, Max Continuous: 30
AC Input Volts: 20-32v
Ripple and Noise: less than 50 mV RMS
Maximum Power (+/- 3%) @ 25°C: 35A
Typical Efficiency: 92%
Operating Temperature: -20 to +30°C
Regulatory Approval: EN50081-1, EN50082-1
Manufacturer: Samlex
Manual
Download PDF
