Battery Mat 12 x 12 inch #BatMat1212

Battery Mat 12 x 12 inch #BatMat1212
Product Description

Battery Mat prevents metal corrosion caused by battery acid. It installs in minutes. Just place the battery mat in the bottom of the battery tray and install the battery.

The Battery Mat is made of super absorbent polypropylene needle punch felt; a rugged space age product. Its unique construction allows the battery mat to trap and contain acid while powerful neutralizing agents start to work immediately to counterbalance the hazardous effects of the acid.

Here are a few Frequently Asked Questions on Battery Mat:
Q. How will water effect the Battery Mat?
A. The Battery Mat may become wet and then dry out with no adverse effects.

Q. What is the typical life span in an automotive application?
A. Approximately 3 years.

Q. Can I paint Battery Mat?
A. Painting Battery Mat is not recommended. If you want to change the color of the exposed edges of the battery mat we recommend the use of a Marks-A-Lot permanent Marker.

Q. Can I cut Battery Mat to fit my battery size?
A. Yes, Battery Mat should be cut to provide a 1/8 inch skirt area reaching beyond the outer edge of the battery. A good pair of scissors or razor blade may be uses.

Available in large quantities by the piece or rolls, please call for pricing.
Available in large quantities by the piece or rolls, please call for pricing.

DC to DC converters
Cables, connectors, plugs
Battery Disconnects

Copyright © 1997-2010 BatteryStuff.com LLC. All Rights Reserved.