BatteryStuff.com

S-2012A, 2000 watt, 80A charger/inverter/transfer switch

 InverCharge 2012A by Samlex-803
View Larger Image

image
image
Works as a utility backup, as well as a UPS system for small offices or multiple computer workstations. This single unit can be used to replace a seperate inverter, a charger, and a switching box!

S-2012A, 2000 watt, 80A charger/inverter/transfer switch
Product Description

The S-2012A 2000 watt InverCharge by Samlex is not only an inverther but also contains a powerful 80A smart charger. It Actually contains three modules in a single unit: Inverter, Charger, and Quick transfer switch. The S-2012A inverter is a heavy duty continuous working module generating a sinusoidal wave from a 12 volt battery bank, which can supply energy to various loads such as resistive load(heater) inductive load(air conditioner, refrigerator) electric motors(vacuum cleaners), and rectifier loads(computers) All S series Invercharge inverters are designed with the extreme duty cycle in mind. De-rating is not necessary, as it will provide a rapid and complete charge thought the charge process.

The internal smart charger can be set with different charge profiles and battery capacities in mind. The swithc module automatically diverts the energy transfer path between the inveter and utility source. When the utility source is lower than the transfer level, the path switches to the inverter. Otherwise the load is conducted to the utility source. The transfer time is .25-.50 of the total cycle time. The internal 80 amp charger can charge a 12v 1000 ah battery pack in about 14 hours. An example: the S-2012A with a 1000 ah battery bank can supply a 2000w workload for about 6 hours after a 14 hour charge.
Features
  • Heavy duty inverter with high power battery charger included
  • Highly efficient operation, high surge capacity and low idle current
  • Seamless transfer (grid / generator to battery and battery to grid / generator)
  • Adjustable load sensing
  • Long backup time up to 10 hours (based on the battery bank and loads)
  • Optimal 3 Step Charging
  • Built-in Mode Indicators
  • Demand Sensing
  • Over Voltage Protected
  • Short Circuit Protection
  • Overload Protection
  • Fan Control
  • 2yr Warranty
Comments
Does not include input or output wiring. Configured for hard wiring setup.

BatteryStuff Part #: S-2012A
Price: $689.00
in stock In StockNo Tax
 
Technical Specifications
Dimensions: 25.6" L x 12.6" W x 12.6" H
Actual Weight (lb.): 53
Shipping Weight (lb.): 60
Maximum Power Output, Continuous: 240A DC
Rated Power: 2000Watt
Max Current, During Bulk Charge: 80A
Typical Efficiency: 85%
Regulatory Approval: UL1741 pending
Manufacturer: Samlex
No Sales Tax