BatteryStuff.com

view large photo

Swipe Photo to View More

ChargeTek 24v 10 Amp 230VAC Waterproof On-Board Smart Charger RTIC-2210-WP

RTIC-2210-WP
$285.00 - No Tax
This item qualities for
$7.50 Flat Rate Shipping*
Out of Stock

Unit operates on 230 VAC

Share this item with your friends

Product InformationStore Part Number: RTIC-2210-WP

Overview

The RTIC2210-WP is a rugged, waterproof and sophisticated three state lead-acid battery charger. With a wide operating temperature range (-20°C to 50°C) and UL/CSA1236 certification, this product is especially suited for high end industrial applications. The RTIC2210-WP is factory programmable to accommodate several charging algorithms and an LED display to indicate status. Optional relay signals and remote temperature compensation is also available (Sold Seperatly). The charger is controlled by an embedded microcontroller that contains software developed by and which is proprietary to Chargetek. The RTIC2210-WP precisely controls charging voltage and current to ensure a complete recharge every time. The charger may be left connected indefinitely to the battery, maintaining full charge at all times.

The RTIC 2210 utilizes state of the art high frequency power processing that converts the AC line power to 24 VDC efficiently and safely. The charger is completely waterproof and sealed with UL approved 94VO flame retardant epoxy. This sealing also provides extreme vibration and shock resistance since the encapsulated unit is effectively a “brick”.

Features

  • Optimal three stage charging
  • State of charge / Amp / AC LEDs
  • Low standby battery drain
  • Optional control / status signals (Sold Separately)
  • Optional temp compensation (Sold Separately)
  • Vibration resistant
  • Reverse polarity protected
  • Over temperature protected
  • Over current / voltage protected
  • Waterproof / hermetically sealed
  • UL/CSA 1236 certified
  • Two year warranty

Comments

*Flat Rate shipping is for the lower 48 states only.


Tech Specs

  • Dimensions (LxWxH): 9.37 x 7.60 x 3.5 in
  • Weight: 9.95 lb
  • Shipping Weight: 12.0 lb
  • AC Input Voltage: 180-265 VAC
  • AC Input Volts Frequency: 47-63 Hz
  • AC Input Current (180 VAC @ 29 VDC output): 3.0 A
  • Fast Charge Terminaction Voltage, 25C (VFSTERM): 29.2-29.7 VDC
  • Float Voltage, IOUT<1.0A, 25C (VFL): 26.8-27.4 VDC
  • Fast Charge Current, VBATTERY=24V (IFS): 9.0-11.0 A
  • Absorption Mode Charge Termination Current, Transition From Fast to Absorption (IABTERM): 2.5-3.5 A
  • Model: RTIC-2210-WP
  • Manufacturer: Chargetek
  • Float Charge Termination Current (IFLTERM): 1.2-1.8 A
  • Standby Current, AC off (ISBY): 0.5 mA
  • Storage Temperature: -40°C - 80°C
  • Operating Temperature: -20°C - 50°C
  • Relative Humidity: 0 - 95% relative humidity (non-condensing)
  • Input to Output / Chassis Voltage Isolation: 2KV (leakage current less than 1 mA)
  • Output to Chassis Voltage Isolation: 50 V (can be increased / consult factory)
  • Output Banks: 1
  • Regulatory Approval: UL Listed
  • Manufacturer Part #: RTIC-2210-WP
  • Made In: Asia

Reviews and Ratings

Do you own the RTIC-2210-WP? Please, tell us what you think about it. It helps us provide you with better products. Please note that it may take up to 72 hours for your review to appear.


Manuals & Tutorials

Manual

Specification




Order Line: 1-800-362-5397
M–F 6am–5pm PST
Tech Help: 541-474-4421
Fax: 541-471-6014
276 Tech Way, Suite A
Grants Pass, OR 97526
Buy Veteran, SEMA Member, and Blueribbon Coalition Blueribbon Coalition SEMA Member Buy Veteran