36v 4 amp charger by Japlar, JAC0436r/JAC0891-102
Replaces: Soneil 3610SRF. Not for use with true Gel batteries
This battery charger is a replacement for the Soneil 3610SRF
36v 4 amp charger by Japlar, JAC0436r/JAC0891-102
Product Description
Protection provided: Reverse Polarity, Short Circuit, Over-Voltage, Over Current and AC Surge. Soft Start and Stop; Starts and stops gradually. No sudden in-rush of current. This protects both the batteries and any other circuits connected to the charger.
Japlar Battery Charger transforms the 100 to 240 VAC into 36v VDC at about 100,000 Hz (3333 times faster than conventional charger), which requires a much smaller transformer and therefore results in a unit of smaller size, low weight and improved efficiency. The JAC0436 uses sophisticated electronic circuitry with microchips. All present day computers use switch-mode technology.
Stage 1: Constant Current Mode (CC)
The charger changes to constant current 4.0A. When the battery voltage reaches up to 43.8v, the charging stage changes from (CC) Constant Current to CV (Constant Voltage) mode.
Stage 2: Constant Voltage Mode (CV)
The charger holds the battery at 40.5v and the current slowly reduces. The moment the current reaches 0.5 C (C= Battery Capacity), is called the Switching Point. The Switching Point is one of the great features of this battery charger that it can adjust the current automatically according to the battery capacity. Other chargers without microprocessors are not capable to adjust the current automatically.
Stage 3: Standby Voltage Mode
The charger maintains the battery voltage at 40.5v and current slowly reduces to zero. Charger can be left connected indefinitely without harming the battery.
This charger typically ships with ring type connectors, allowing the customer to adapt the charger to their specific needs.
- Totally Automatic Switch-Mode Battery Charger
- Suitable for Sealed (AGM) and Wet Lead Acid Batteries
- Suitable for use anywhere in the world.
- Auto sensing input: 100 to 240 VAC 47 to 62 Hz
- Automatic Cut Off and then True Float. Can be left connected indefinitely without harming the battery.
- Two color LED to indicate charge status
- Mean Time between failures 30,000 hours
- Zero Current Drain when AC power is off
- Fan cooled circuitry
- Optimal 3 Step Charging
- Built-in Mode Indicators
- Reverse Polarity Protection
- Over Voltage Protected
- Short Circuit Protection
- Overload Protection
- Fan Control
- Thermal Protection
- 2 Year Warranty
|
Review Summary
0
0
0
0
0
Write Your Own Review
Do you own the 36v 4 amp charger by Japlar, JAC0436r/JAC0891-102? Please, tell us what you think about it. It helps us provide you with better products. Please note that it may take up to 72 hours for your review to appear. Write a review |
Width 3.5
Height 1.8
Weight 2.2
Shipping Weight (lb.) 3
Max Current, During Bulk Charge 4 A
Absorption Voltage 43.8 +/- 0.2 V
AC Input Volts 100-240 VAC
AC Input Volts Freq. 50-60 Hz
Float Voltage 40.5 +/- 0.2 V
Enclosure Aluminum Case
Output Banks 1
Regulatory Approval CE Listed, UL pending
Manufacturer: Japlar Schauer
Order Line: 1-800-362-5397
M–F 7am–4pm PST
Tech Help: 541-474-4421
Fax: 541-471-6014
276 Tech Way, Suite A
Grants Pass, OR 97526




