Overview
The Guest 2710A is a 12V 10-amp waterproof on-board smart charger. The 2710A features a single 12V, 10-amp output lead designed to charge a Group 24 through Group 31 battery. The Guest 2710A is IP67 waterproof-rated, shock-resistant for both fresh and saltwater applications, and features a low-profile, flangeless extruded aluminum housing with heat sink cooling fins.
The 2710A features dedicated charging and sensing indicators per charging bank. The easy-to-read graphics indicate the status of each battery bank through the charging process. The charger features built-in safety protections, including reverse polarity, overcurrent, overvoltage, over-temperature, and ignition protection.
Recommended uses: Bulk charge of flooded and AGM maintenance-free batteries group 24 (Approx 75 AH) through group 31 (Approx 110 AH), and charge/maintenance of batteries partially discharged up to 150 amp hours. Not recommended for 6 Volt Batteries, 4D or 8D batteries, or any combined battery amp-hour rating exceeding 150 AH per battery bank.
Features
- For Flooded & AGM Lead Acid Batteries
- All high frequency, digital charging technology
- Fully automatic 5-stage performance charging
- Dedicated battery charging, sensing and control
- Expanded LED charge status monitor
- Wiring and battery fault detection
- Auto-maintain energy saver mode
- Up to 40 percent lighter
- 100 percent Waterproof (IP67) and shock resistant for all fresh and saltwater applications
- Pre-wired for easy installation
- For 12 volt flooded and AGM lead acid batteries
- Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection. In-line fuses for maximum DC wire protection.
- 2 year warranty
Technical Specifications
- Dimensions (LxWxH): 9 x 7.5 x 2.4 in
- Weight: 8.6 lb
- AC Input Amps: 2 A
- AC Input Volts: 120 V
- AC Input Volts Freq.: 50/60 Hz
- AC Input Volts Range: 90-135 V
- Max Current, During Bulk Charge: 10 A
- Min Battery Voltage Per Bank: 4.0 V
- Absorption Voltage: 14.6 V
- Absorption Output Current: 2-10 A
- Float Voltage: 13.4 V (Auto Maintain Energy saver mode)
- Enclosure: Plastic Composite
- Output Banks: 1
- Waterproof: IP67 Rated
- Regulatory Approval: Conforms to UL STD. 1236 / Certified to CSA STD. C22.2 No. 107.2 / FCC Class B / Design and Constructed to ABYC A-31 / CEC Listed
- RoHS: Compliant
- Shipping Weight: 10 lb
- UPC: 046904904105
- Made in: Asia
- Manufacturer: Guest/Marinco
- Manufacturer’s Part Number: 2710A
- Model: ChargePRO10
