Overview
The CT 500 fully automatic charger that can manage 1 or 2 batteries at once. In the case of 2 batteries the charger manages each battery separately. This computer SMART charger applies super efficient 3 step regulated charging and charges batteries quickly. When a full charge is reached, a float mode is maintained and the battery remains at full charge until it is ready to be used. The CT-500 can be used for single 12 volt, dual 12 volt and two 12 volt batteries in series as 24 volt system.
CT-500 will not work on single 24 volt battery such as aircraft design batteries.* Flat Rate shipping is for the lower 48 states only. *
Features
- Dual output, works for 2, 12 batteries in parallel or series
- Waterproof & Easy Install
- Optimal 3 Step Charging
- 2 Fully Isolated Outputs
- Built-in Mode Indicators
- Spark Free Hook Up
- Reverse Polarity Protection
- Over Voltage Protected
- Short Circuit Protection
- Overload Protection
- Line Regulation
- 2 Year Warranty
Technical Specifications
- Dimensions (LxWxH): 6 x 3.2 x 2.6 in
- Weight: 3 lb
- Max Current, During Bulk Charge: 5 A
- Absorption Voltage: 14.7 V
- AC Input Amps: 2 A
- AC Input Volts: 115 V
- AC Input Volts Freq.: 47/63 Hz
- AC Input Volts Range: 100–132 V
- Float Voltage: 13.6 V
- Working Temperature: -10° to 50° C
- Output Banks: 2
- Recommended Use: Mounted, indoor/outdoor use
- Regulatory Approval: UL Listed
- Shipping Weight: 4 lb
- Made in: Asia
- Manufacturer: Chargetek
- Manufacturer’s Part Number: CT500-1
