Overview
The RealPro RS1 Series marine battery charger (formerly Recreation Series) is an affordable, reliable and safe battery charger for everyday use. The charger is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier duty and higher amperage product.
The Waterproof RealPro RS1 Series 6 amp charger is microprocessor controlled, powerful, and fast. If you need a quick and reliable battery charger for a 12-volt battery system, this is it. This industrial battery charger by Pro Charging Systems/Dual Pro incorporates important features such as being fully waterproof, completely automatic, overcharge protected, temperature compensating, and ignition protected. They also have LED readouts, and are USCG approved.
It is recommended for a 12-volt battery system no larger than a group 31 (approximately 130AH). The Pro Charging Systems RS1 is a rugged, waterproof construction charger requiring no mounting restrictions. Suitable with Flooded Wet Cell, AGM, or Lithium batteries!
Features
- For Flooded, AGM, & Lithium!
- Low 2-Volt Charge Detection!
- Reverse polarity protected!
- Ignition protected!
- Designed for use in fresh and salt water
- Dependable, rugged construction and waterproof
- Battery maintenance mode
- DC charge cables = 5ft
- AC power cord = 3ft
- Approved and meets ISO 8846 Marine standards
- LED lights indicate the state of charge
- FCC 15 Parts A and B Interference Compliant
- 2 Year Warranty
Technical Specifications
- Dimensions (LxWxH): 3 x 4.5 x 6.5 in
- Weight: 3 lb
- Shipping Weight: 5 lb
- DC Output Voltage: 12 V
- Absorption Voltage: 14.7 V
- AC Input Amps: 2 amps max
- Maximum AC Current @ 90 VAC: 2 A
- Maximum AC Current @ 180 VAC: less than 2 A
- AC Input Volts: 100-240 VAC
- AC Input Volts Freq.: 47-63 Hz
- AC Input Volts Range: 90-264 VAC
- Float Current: less than 500 mA
- Float Voltage: 13.3 V
- Power Requirements: 100 W
- Maximum Power Output, Continuous: 72 W
- Maximum Output Amps Single Surge: 6 amps(DC side)
- Maximum Input Current: 2 amps
- Equalization Voltage: none
- Charge Reset: Battery Voltage Threshold: 2 volts for initalization of charge
- Working Temperature: -30° to 65° C
- Storage Temperature: 20° C optimum
- Inline Fuse: 30 Amp AGX
- Over Temperature: 100° C
- Ripple and Noise: 250 MV max peak to peak
- Enclosure: Blend Polycarbonate
- Output Banks: 1
- Temperature Compensation: Yes
- Recommended Use: Harsh, outdoor, marine
- Regulatory Approval: USCG 33 CFR183.410 CE Approved
- Warranty: 2 Year
- UPC: 738562000533
- Made in: China
- Manufacturer: Pro Charging Systems
- Manufacturer’s Part Number: RS1
- Model: RS1
