BatteryStuff.com!
BatteryStuff.com
0
800-362-5397 M-F 6am-5pm PST.
MENU Menu Icon

Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger

Part #: 2740A
zoom photos
Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger
Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger
Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger
Share this item
share Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger on Facebook share Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger on Twitter share Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger on Pinterest

Guest 12v 24v 36v 48v 40 Amp CHARGEPRO 4-Bank On-Board Smart Charger

Part #: 2740A
Free Ground Shipping to Lower 48 States *
$479.99 In Stock ( 3 )
Link copied to clipboard

The Guest 2740A On-Board battery chargers have been redesigned from the inside out with the customer in mind. The 2740A charger is a marine waterproof IP67 rated charger that has four 12v outputs. These 12v outputs have a rating of 12v 10 Amps each for the combined 40 amp rating.

The Guest 2740A can be used for four 12v banks, two 24v battery bank using 12v batteries, or one 36v battery bank and 12v bank. Typical installation is for 36-volt series system using three 12v batteries for a trolling motor and an additional bank for a starting 12v battery. Another popular installation is to maintain a 24-volt trolling motor battery pack using two 12v batteries leaving you two banks to maintain two 12v starting motor batteries.

The newest generation Guest On-Board Marine battery chargers include leading advancements in digital charging technology and waterproof design/construction. Every Guest charger has a dedicated charging, sensing and control per bank. The easy to read graphics indicates the status of each battery bank through the charging process.

Read More

Overview

The Guest 2740A On-Board battery chargers have been redesigned from the inside out with the customer in mind. The 2740A charger is a marine waterproof IP67 rated charger that has four 12v outputs. These 12v outputs have a rating of 12v 10 Amps each for the combined 40 amp rating.

The Guest 2740A can be used for four 12v banks, two 24v battery bank using 12v batteries, or one 36v battery bank and 12v bank. Typical installation is for 36-volt series system using three 12v batteries for a trolling motor and an additional bank for a starting 12v battery. Another popular installation is to maintain a 24-volt trolling motor battery pack using two 12v batteries leaving you two banks to maintain two 12v starting motor batteries.

The newest generation Guest On-Board Marine battery chargers include leading advancements in digital charging technology and waterproof design/construction. Every Guest charger has a dedicated charging, sensing and control per bank. The easy to read graphics indicates the status of each battery bank through the charging process.

Recommended uses: Bulk charge of flooded and AGM maintenance free batteries group 24 (Approx 75 AH) through group 31 (Approx 110 AH), and charge/maintenance of batteries partially discharged up to 150 amp hours. Not Recommended for 6 Volt Batteries, 4D or 8D batteries, or any combined battery amp/hr over 150 AH per battery bank.

Features

  • For Flooded & AGM Lead Acid Batteries
  • All high frequency, digital charging technology
  • Fully automatic 5-stage performance charging
  • Dedicated battery charging, sensing and control per bank
  • Expanded LED charge status monitor
  • Wiring and battery fault detection
  • Auto-maintain energy saver mode
  • Up to 40 percent lighter
  • 100 percent Waterproof (IP67) and shock resistant for all fresh and saltwater applications
  • Pre-wired for easy installation
  • For 12 volt flooded and AGM lead acid batteries
  • Built-in safety: reverse polarity, over-current, over-voltage, over-temperature and ignition protection. In-line fuses for maximum DC wire protection.
  • 2 year warranty

This Product Replaces These Other Products

Works In

Vehicles that 2740A works in

Technical Specifications

  • Dimensions (LxWxH): 8.7 x 9.0 x 4.1 in
  • Weight: 11 lbs
  • Shipping Weight (lb.): 14
  • AC Input Amps: 11.2 A
  • AC Input Volts Range: 90-135 V
  • AC Input Volts Freq.: 50/60 Hz
  • Max Current: 40 A
  • Max Current per Bank: 10A
  • Min Battery Voltage Per Bank: 4.0 V
  • Absorption Voltage: 14.6 V
  • Absorption Output Current: 2-10 A
  • Float Voltage: 13.4 V (Auto Maintain Energy saver mode)
  • Enclosure: Plastic Composite
  • Output Banks: 4
  • Waterproof: IP67 Rated
  • Warranty: 2 Year
  • UPC: 046904904150
  • Made in: Asia
  • Manufacturer: Guest/Marinco
  • Manufacturer’s Part Number: 2740A
  • Model: 2740A

Videos

Reviews

Do you own the 2740A? Please, tell us what you think about it. It helps us provide you with better products. Please note that it may take up to 72 hours for your review to appear.

Write a Review Do you own the 2740A? Please, tell us what you think about it. It helps us provide you with better products. Please note that it may take up to 72 hours for your review to appear.

Manuals & Tutorials

Related Products

thumbnail photo thumbnail photo thumbnail photo