Important NoticeOverview
Marinco 20 amp (10/10 Amp) 3-stage fully automatic electronic two bank charger is designed to recharge multiple 12 volt batteries configured in series and/or parallel. Each 12v battery bank receives a dedicated 12v 10 amps of charge current.
For 24v series configurations you must be using two 12v batteries/banks in series, and each 12v battery/bank will receive a dedicated 12v 10 Amp charging bank.
ChargePro onboard chargers have the same housing and mounting dimensions as our traditional Charge Pro Guest chargers with a number of performance enhancements.
Recommended uses: Bulk charge of flooded and AGM maintenance free batteries group 24 (Approx 75 AH) through group 31 (Approx 110 AH), and charge/maintenance of batteries partially discharged up to 150 amp hours.
* Flat Rate shipping is for the lower 48 states only.Features
- Charge flooded and AGM batteries
- Microprocessor controlled for accurate charging
- Universal input 120/230V input for go-anywhere freedom
- Intuitive operation
- Isolated outputs
- Outputs can be put in series or parallel for higher voltage or current
- Completely sealed, epoxy filled
- IP68 waterproof
- Designed for harsh marine and industrial environments - moisture, salt, shock and vibration tested
- Non-corroding housing for ultimate reliability
- Meet global industry standards including UL, CSA, ABYC, California efficiency regulations (CEC)
- Footprint same as former Charge Pro Guest Chargers
- ConnectCharge Plug for easy assembly to inlet (Item #150CCI) with no wiring
- 2 Year Warranty
Technical Specifications
- Dimensions (LxWxH): 9.6 x 7 x 2.6 in
- Weight: 8 lb
- AC Input Amps: 5 A
- AC Input Volts: 120 V
- AC Input Volts Freq.: 50–60 Hz
- AC Input Volts Range: 100–240 V
- Max Current, During Bulk Charge: 20 A
- Bulk Voltage: 14.3 V
- Bulk Output Current: 8.5-10 A
- Absorption Voltage: 14.3 V
- Absorption Output Current: 2-10 A
- Float Voltage: 13.3 V
- Float Output Current: 0-2 A
- Enclosure: Plastic Composite
- Output Banks: 2
- Waterproof: IP68 Rated
- cULus: ANSI/UL 1236 "Battery Chargers for Charging Engine-Starter Batteries" E227501
- ABYC: American Boat & Yacht Council = UL 1236 marine section A20 (Battery Chargers), E8 (AC Systems on Boats), E9 (DC Systems on Boats)
- CEC: CB Mark for 120 V
- FCC: Labeled, FCC Part 15 Class B EN 55022
- RoHS: Compliant
- Shipping Weight: 12 lb
- UPC: 093344058288
- Made in: Asia
- Manufacturer: Guest/Marinco
- Manufacturer’s Part Number: 28220
- Model: 28220
