Batteries, Chargers, and More
person
cart

view large photo

medium image

Cotek 12v 2500 Watt Pure Sine Wave Power Inverter ST2500-112

ST2500-112
$1,099.00 - No Tax

OR Simple-Click Checkout
In Stock
Share this item with your friends

Product InformationStore Part Number: ST2500-112

Overview

Converts 12 VDC to 100 / 110 / 120 VAC

Cotek offers superior quality microprocessor controlled Pure Sine Wave AC-DC power inverters for many different applications. The ST Series are designed for Fleet, Utility, and Emergency Vehicles to run tools, lights and equipment. ST Series inverters feature a Power Saving Function and Integrated Automatic AC Transfer Switch that reacts in less than 14msec. keeping mission critical equipment online. BatteryStuff.com offers PURE SINE WAVE (aka true sine wave) that provides high-end specialty users power portability for sensitive electronic equipment. The clean power delivered by a Pure Sine Wave is of the same quality and efficiency as the power provided by your utility company, which is not the case with the cheaper and more popular modified sine inverters.

We highly recommend the use of Pure Sine Wave Inverters to power Computers and related peripheral devices; i.e. printer’s, optical drives, laser copiers, and if in doubt check with the manufacturer of your equipment.

Other devices that benefit when Pure Sine Wave power is used are variable speed control motors using solid state circuitry, Audio Amplifiers, Digital Clocks and Radios, Medical Equipment, Microwaves, etc.

Features

  • True sine wave output (THD <3%)
  • Power ON-OFF Remote Control (optional equipment no included)
  • Input & Output Fully Isolation
  • Load Control Cooling Fan
  • Advanced Mircoprocessor
  • Output Frequency 50/60 Hz Switch Selectable
  • Low Power Saving Mode to Conserve Energy
  • Built-in Transfer Switch and AC Circuit Breaker
  • ROF(remote override function) or Ignition Lockout Function Option
  • Speed up Transfer Time & Synchronized Operation with Utility AC Source
  • Input Polarity Reverse / Under Voltage / Over Voltage Protections
  • Output Short Circuit / Overload / Over Temperature Protections
  • Tri-color Indicator Display Input, Output Level & Failure Status
  • e-13/ CE/ FCC approved

Comments

PLEASE NOTE: Many electrical devices require a good deal more Watts to start or energize than is required to run once started. For instance an electric motor may require only 900 watts to run but need may 2300 watts to start. Please check with the manufacturer of your equipment to obtain minimum watts for starting operation of the equipment or device. *Flat Rate shipping is for the lower 48 states only.


RECOMMENDED REMOTE
Samlex Remote S-R8
S-R8
This simple switch allow the user to remotely switch on or off the ST2500-112 inverter made by Cotek. Allows for simple hookup with one phone jack type connector, there is no cutting and splicing necessary!


Tech Specs

  • Dimensions (LxWxH): 18.23 x 13.07 x 4.53 in
  • Weight: 24.25 lb
  • Shipping Weight: 30 lb
  • Output Voltage: 100/110/120 VAC
  • Rated Power: 2500W
  • Surge Power: 5000W
  • Waveform: True Sine Wave (THD<3%)
  • Frequence: 50/60 Hz
  • AC Regulation: ±5%
  • Power Factor Allowed: COSθ-90°~COSθ+90°
  • LED Indicator: Input Voltage Level, Output Load Level and Fault Status
  • No Load Current Draw: 2.62A
  • Stand-by Current Draw: 0.60A
  • DC Voltage: 12VDC
  • Voltage Range: 10.5~15VDC
  • Efficiency (Typ.): 88%
  • Fuse: 40Ax10
  • Manufacturer: Cotek
  • Circuit Breaker: 30A
  • Synchronous AC Transfer: Yes
  • Transfer Switch: 30A
  • Transfer Time: Inverter to Utility AC: 8~10msec.;Utility AC to Inverter: 16~50msec.
  • Remote Control: CR6/CR8 optional
  • Battery Low Alarm: 11VDC
  • Battery Low Shutdown: 10.5VDC
  • Over load Protection: Shut off output voltage, re-power on to recover
  • Battery Polarity Protection: By Fuse Open
  • Over Temperature: Shut off output voltage, recovers automatically after temperature goes down
  • Output Short Protection: Shut off output voltage, re-power on to recover
  • Operating Temperature: 0°~40°C
  • Working Humidity: 20~90RH non-condensing
  • Safety Standards: Meet UL458
  • EMI Conduction & Radiation: Compliance to FCC class A
  • Cooling: Load Control Cooling Fan
  • Manufacturer Part #: ST2500-112

Customers who bought this product also bought:

Reviews and Ratings

Do you own the ST2500-112? Please, tell us what you think about it. It helps us provide you with better products. Please note that it may take up to 72 hours for your review to appear.


Manuals & Tutorials

Specifications




Order Line: 1-800-362-5397
M–F 6am–5pm PST
Tech Help: 541-474-4421
Fax: 541-471-6014
276 Tech Way, Suite A
Grants Pass, OR 97526
Buy Veteran, BBB, SEMA Member, and Blueribbon Coalition
large image