The Eagle Performance 48 volt 15 amp charger is meant for rough and tough applications. For any heavy-duty 48-volt system, the Eagle industrial battery charger by Pro Charging Systems/Dual Pro is set up to charge efficiently and reliably every time. The i4815OBRMLIFTSPC has an integrated microprocessor to make sure that you never have to worry about overcharging your battery system.
The Dual Pro Eagle Series chargers 5 LEDs indicating battery charge level (standard LED display is located on the right-hand side of the unit, see specification sheet). When batteries are fully charged, the Eagle Charger turns off completely. Should the batteries discharge to a programmed voltage level, the Eagle Charger automatically reactivates the charge circuit and bring the batteries back to 100% charge. Eagle boom lift chargers use a proprietary method of adjusting charge algorithm to compensate for temperature thus improving battery charge quality and safety.
Ideal for use on Genie Articulating Z-Booms. On-board model makes it simple to mount on various applications.
Made in the USA!
Designed for Genie Articulating Z-Booms.
Overview
The Eagle Performance 48 volt 15 amp charger is meant for rough and tough applications. For any heavy-duty 48-volt system, the Eagle industrial battery charger by Pro Charging Systems/Dual Pro is set up to charge efficiently and reliably every time. The i4815OBRMLIFTSPC has an integrated microprocessor to make sure that you never have to worry about overcharging your battery system.
The Dual Pro Eagle Series chargers 5 LEDs indicating battery charge level (standard LED display is located on the right-hand side of the unit, see specification sheet). When batteries are fully charged, the Eagle Charger turns off completely. Should the batteries discharge to a programmed voltage level, the Eagle Charger automatically reactivates the charge circuit and bring the batteries back to 100% charge. Eagle boom lift chargers use a proprietary method of adjusting charge algorithm to compensate for temperature thus improving battery charge quality and safety.
Ideal for use on Genie Articulating Z-Booms. On-board model makes it simple to mount on various applications.
MADE IN THEUNITEDSTATES.
* Flat Rate shipping is for the lower 48 states only.
Features
For use with Lead Acid (Wet/AGM) batteries
Easily reconfigured for Gelled Electrolyte batteries
Do you own the i4815OBRMLIFTSPC? Please, tell us what you think about it. It helps us provide you with better products. Please note that it may take up to 72 hours for your review to appear.
★★★★★
Great Replacement Charger
After installation and modifying the boom lift to accept the charger it has worked without any issues and so far has maintained the batteries without excessive boil out as we were experiencing with the previous charger.
Cons:
Not a con - but installation required considerable revision to the old charger mounting enclosure area which was not a major problem but took several hours.
Is this review helpful?
Written bybassetthound on Aug 29, 2014.
Ownership: Just Bought.
— (80 of 157 customers found this review helpful)
★★★★★
great product just as described
the product is just as described in literature. easy to install. the battery power gauge is worth it to know when battery is charged. the install took about 1 HR it was ready for charging.
Write a ReviewDo you own the i4815OBRMLIFTSPC? Please, tell us what you think about it.
It helps us provide you with better products. Please note that it may take up to 72 hours for your review to appear.