BatteryStuff.com!
Get Tech Help &
Product Advice
x
tech person
If you have a tech question or don’t know which product to buy, we can help.
call
Call
email
Email
Call an Expert 541-474-4421 M–F 6:30 AM – 3:30 PM PST

Articles tagged with “parasitic drain”

Written Tutorial | Testing Your Battery for Parasitic Load

Posted on November 22, 2010
Testing a system for current drain To check if something is draining your battery while your bike is turned off you need to test for current, not volts. To do so, do the following: Switch your multi meter to DC AMPs. Amps is usually indicated by an "A" on the Multimeter Switch. AC is usually shown as a "~" symbol and DC shown as a "-" symbol. You usually have to move the Multimeter positive lead to a separate socket on the Multimeter. Sometimes there are 2 sockets, a high range and a low range. Always test on the highest setting first. For example: high setting on your multimeter may be 10 Amp. Test on the 10 Amp setting first, then if the current drawn is less than your Multimeter Low setting, move to that setting and keep testing. read more...

Read blog in RSS news reader with RSS. Read blog using Feedly